Ram 1500 Wheel Torque Specs

Looking to add new wheels to your Ram 1500? At Velgen Wheels, we have put together a quick and easy guide to help torque your Ram 1500 wheels to the correct specification. Follow along as we walk you through torque specs and how to torque your lug nuts.

What Are Wheel Torque Specs?

Wheel torque specs refer to the specific amount of force or torque applied when tightening the lug nuts or bolts on a vehicle's wheels. The vehicle manufacturer provides these specifications and are crucial for maintaining proper wheel installation and overall safety. The torque specs are typically expressed in foot-pounds (lb-ft) or Newton-meters (Nm) and vary depending on factors such as the vehicle's weight, wheel size, and material. Following the recommended torque specifications ensures that the lug nuts or bolts are tightened to the appropriate level, preventing them from becoming loose or over-tightened. This could lead to wheel misalignment, vibrations, or even wheel detachment while driving. Therefore, adhering to the correct wheel torque specs is essential for safe and reliable operation of a vehicle.

Ram 1500 Wheel Torque Specs

The torque specs below should be used as a guide and you should check your user’s manual for the manufacturer’s recommended torque spec. Some models and trim levels may require different specs.

How To Torque Ram 1500 Lug Nuts 

To torque wheel lug nuts properly, follow these step-by-step instructions:

1. Gather the necessary tools: You'll need a torque wrench, a socket that fits the lug nuts on your vehicle, and possibly a breaker bar for additional leverage.
   
   
2. Refer to your vehicle's manual: Consult the owner's manual or the manufacturer's specifications to find your vehicle's recommended torque value. You can use the table above as a guide.
   
   
3. Prepare the vehicle: Park the vehicle on a flat surface and engage the parking brake. If you have a spare tire, ensure it is securely placed nearby for easy access.
   
   
4. Loosen the lug nuts: Use a breaker bar or a lug wrench to loosen the lug nuts on the wheel you're working on. Turn them counterclockwise but avoid removing them completely at this stage.
   
   
5. Position the torque wrench: Attach the socket to the torque wrench, making sure it fits securely. Set the torque wrench to the recommended value specified in your vehicle's manual.
   
   
6. Begin torquing: Starting from the top, position the torque wrench on one of the lug nuts. Apply steady pressure in a clockwise direction until you hear a click or feel the wrench release. This indicates that the desired torque has been reached. Repeat this step for each lug nut.
   
   
7. Follow a star or cross pattern: To ensure even torque distribution, tighten the lug nuts in a star or cross pattern rather than sequentially. This helps prevent wheel imbalance and promotes stability.
   
   
8. Recheck the torque: After torquing all the lug nuts, go back and double-check each one. Apply the torque wrench to each lug nut again to verify that they are all tightened to the recommended specification.
   
   
9. Repeat the process: Repeat the torquing process for each wheel, one at a time, until all wheels have been properly torqued.
   
   
10. Inspect and clean up: Inspect the wheels visually to ensure they are secure and aligned properly. Remove any tools or equipment from the work area and store them safely.

Ram 1500 Wheels At Velgen Wheels

Velgen Wheel is an industry leading provider of aftermarket wheels for the Ram 1500. With a wide selection of sizes, finishes, and widths, Velgen Wheels makes it easy to get the perfect look on your Ram 1500. Shop our full selection of Ram wheels today!